alexander/UnoSDVXCon
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fixed start button bug

Browse Source
This commit is contained in:
Sirawat Pitaksarit
2016-08-26 23:37:00 +09:00
parent 19fa5dadb8
commit 81a047bc54
1 changed files with 11 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

25
SDVXCon.ino
View File

@@ -21,7 +21,7 @@ int const BTC = 6;
int const BTD = 11;
int const FXL = 5;
int const FXR = 7;
int const START = 555; //My controller don't have a start button
int const START = 13;
//Button's LED. From the pin below to LED + resistor to GND.
int const BTLA = A5;
@@ -30,13 +30,13 @@ int const BTLC = A2;
int const BTLD = A0;
int const FXLL = 8;
int const FXLR = 10;
int const STARTL = 556; //My controller don't have a start button
int const STARTL = A3;
//Encoders. If you are using a Copal, the white cable is A and the green cable is B. (Red goes to 5V and black goes to GND)
//VOLL is the left encoder, VOLR is the right encoder. Please DO NOT use pin 13 on Uno. (LED connected pin)
//You MUST connect one of each encoder's white or green cable to pin 2 and 3. These 2 pins on an Uno are special external interrupt pins. (It's fast)
//For example, VOLLA = 2 and VOLLRA = 3. (both encoder's white). The green cable can choose any pin.
//For example, VOLLA = 2 and VOLRA = 3. (both encoder's white). The green cable can choose any pin.
//In short, this will make both encoder good. Without this you will die on Firestorm EXH.
int const VOLLA = 2;
@@ -61,7 +61,7 @@ uint8_t keyFXR = 16; //m
//uint8_t keyFXR = 0x8B; //変換
uint8_t keySTART = 43; //Enter
uint8_t keySTART = 40; //Enter
uint8_t keyVOLLCCW = 20; //q
uint8_t keyVOLLCW = 26; //w
@@ -95,8 +95,6 @@ bool BTAHwState, BTBHwState, BTCHwState, BTDHwState, FXLHwState, FXRHwState, Sta
KnobState VOLLState, VOLRState = Stop;
unsigned long BTADebounce, BTBDebounce, BTCDebounce, BTDDebounce, FXLDebounce, FXRDebounce, StartDebounce = 0;
void setup() {
// put your setup code here, to run once:
Serial.begin(9600);
@@ -107,6 +105,7 @@ void setup() {
setupButton(BTD);
setupButton(FXL);
setupButton(FXR);
setupButton(START);
setupLED(BTLA);
setupLED(BTLB);
@@ -114,10 +113,7 @@ void setup() {
setupLED(BTLD);
setupLED(FXLL);
setupLED(FXLR);
pinMode(12,OUTPUT);
digitalWrite(12,HIGH);
setupLED(STARTL);
}
void setupButton(int button)
@@ -291,9 +287,9 @@ void serialFromState()
//We prioritize buttons first as the knobs can be repeatedly pressed and released.
//Check buttons
int buttons[6] = {BTA,BTB,BTC,BTD,FXL,FXR};
int buttons[7] = {BTA,BTB,BTC,BTD,FXL,FXR,START};
int slotIndex = 2;
for( int i = 0; i < 6; i++)
for( int i = 0; i < 7; i++)
{
if(getButtonState(buttons[i]) == HIGH)
{
@@ -534,7 +530,7 @@ String getName(int inputPort)
}
case START:
{
return "Start";
return "START";
break;
}
case VOLLA:
@@ -638,7 +634,7 @@ void setButtonHwState(int button, bool state)
}
case START:
{
StartState = state;
StartHwState = state;
break;
}
}
@@ -776,6 +772,7 @@ void loop() {
checkButton(BTD);
checkButton(FXL);
checkButton(FXR);
checkButton(START);
checkKnob(VOLLA, VOLLB);
checkKnob(VOLRA, VOLRB);